As a professional metal processing equipment, what precautions should be taken when operating a beveling machine?

Actual shooting of GIRET beveling machine in use at the customer's site.

Before use: Check whether all components of the equipment are in good condition, whether the cutting tools are sharp and firmly installed. Meanwhile, make sure that the power cord and transmission components are undamaged. Clean up impurities such as oil stains and rust on the edges of the workpiece, and place the workpiece stably to prevent it from shaking during processing. Select appropriate cutting tools according to the workpiece material and the required bevel type, and adjust them to the proper positions. Set cutting speed, feed rate and other parameters according to the workpiece size and processing requirements.

During use: After starting the machine, observe whether it operates normally and whether there are any abnormal sounds or vibrations. Align the cutting tools with the edge of the workpiece, ensure that they are perpendicular to the workpiece surface, and adjust the cutting depth properly. Push or move the beveling machine smoothly so that it advances at a constant speed along the edge of the workpiece, keeping the cutting speed and feed rate stable. During the processing, pay attention to observing the quality of the bevel and adjust the position of the cutting tools or cutting parameters in a timely manner.

After use: Turn off the power of the beveling machine, remove the workpiece, clean up the iron filings and residues on the machine, and keep the equipment clean.

In conclusion, the precautions for operating a beveling machine cover multiple aspects such as before operation, during operation and after operation. Only by strictly observing these precautions can the safe and efficient operation of the beveling machine be ensured.